Before opening your ASUS ROG Strix SCAR 18: the precautions to follow

Preparing before you even pick up a screwdriver

Read the entire manual before starting, back up your data, place the laptop on a clean, stable surface, turn it off, then disconnect every peripheral and cable — in that order, without skipping any of it.

Electrostatic discharge — a risk to components

Before touching anything inside, ground yourself with an anti-static wrist strap or by touching a properly grounded object, and remove rings, watches, and other metal objects. Components should always be held by their edges, never by touching the integrated circuits.

A surprising detail: power cuts off automatically

As soon as the bottom cover comes off, the system's power is automatically cut — a safety mechanism, not a fault. To restore it once the work is done, simply reattach the cover securely and plug the AC adapter back in.

A good habit before disassembling anything

Photograph the appearance of the cables, their routing, the connectors, and the screw locations before starting each step — it saves a lot of guesswork when putting everything back together. Keep any removed adhesive, insulating material, and screws somewhere safe until the job is done, since they're often needed again during reassembly.

Replacement parts — never generic ones

Never use a power adapter or battery from another device: the risk of fire or explosion is real. Only use certified parts bought from authorized retailers, to guarantee compatibility and reliability. If unsure about a step, it's better to stop and contact an authorized service center than to push through.